Ascend like never before... First there was the telescopic seatpost, now there is the Seatswitch. The Seatswitch is a saddle tilt adjuster for telescopic seatposts that allows you to pedal with more traction, comfort, and control than ever. With the lever, you can adjust the saddle tilt by 6 degrees, lowering the saddle nose by 14 mm (depending on the saddle model), or, depending on the base installation, raising it. This allows you to assume the optimal climbing position: perfectly balanced and with less pressure on critical areas. You will be able to climb faster and longer, with less pain and more control.

Adjusting saddle tilt for climbing offers many advantages:

1. Greater comfort on long rides
2. Greater forward tilt of the pelvis for better posture
3. Better weight distribution between the handlebar grips and the saddle while climbing
4. Better technical ability on climbs
5. Greater pressure on the rear wheel while climbing

Attention: ensure the saddle has sufficient height. A minimum clearance of 25 mm (measured from the center of the saddle rails to the lower edge of the saddle) is required!

- Weight: 200 g (+/- 5% tolerance) (realistic weight increase: weight of the SeatSwitch minus the weight of the upper and lower seatpost clamps (approx. 65 g on average))
- Seatpost clamp: Type 1 / additional thickness available
- Mounting height: + 23 mm
- Minimum distance saddle rail center - lower saddle edge: 25 mm
- Angle adjustment: 2 positions (-6°/neutral or neutral/+6° depending on installation)
- Secure saddle fixation thanks to the two-bolt system
- Material: aluminum / steel
- Optimized fender cover for better protection from dust and dirt
- The lateral clamping ring has been adjusted
- The saddle clamp clip screws have been replaced with black screws for a cleaner design