The Muc-Off Tubeless Tag Mount offers a discreet way to install a tracker inside your tubeless rear tire that works in conjunction with our Find My app. Tubeless valves that allow you to track your bicycle in the event of theft and locate it via the Find My iPhone application. The tracker will be housed in a tubeless 3-part rubber and silicone protective valve holder and supplied with the tubeless valves, to ensure a tight seal against the rim during installation inside the tubeless tire.

- Valve length: 44 mm (2 pieces)
- Easy to install
- Ensures protection of the tracker and rim even after a strong blow to the wheel
- Rubber stem holder body durable allows free passage of air and sealant
- Silicone top cover protects the tracker
- Does not block the tracker's signal
- Supplied with 3 pairs of rubber valve bases
- Anti-tangle design keeps tracker securely in place

PLEASE NOTE: Air Tag not included in holder

HOW TO INSTALL IT?

- Remove the Tubeless label holder from the package, then carefully remove the pink silicone top cap from the black rubber body, followed by the inner cap.
- Make sure the tracker is set up and connected to the iPhone app.< br> - Take the tubeless valve and remove the cap, lock ring and o-ring from the valve stem, then insert the tubeless valve into the rubber hex slot of the black stem holder. Pull the valve from the valve core side until the base of the valve rests on the inside base of the holder. (Keep the O-ring and lock ring secure until mounting on the rim).
- Place the inner cap over the hex opening to lock the tracker storage compartment.
- Place the tracker at the top of the connector with the battery cover facing the stem base. It is best to push the tracker into place with both thumbs, so that the side walls of the black rubber body overlap the sides of the tracker.
- Then carefully attach the silicone top cover to the assembled tracker and glove box , turning it over and slowly stretching it until it covers the entire well.
- Finally, Select the appropriate rubber for your rim type and slide it onto the valve stem until the base rests on the bottom of the tracker support.< /p>