CYCLUS TOOLS snap.in tool for the lock nut of the Continental electric motor. This lock nut extractor is designed for the assembly and disassembly of the lock nuts of Continental 48V Prime E-bike electric motors. To ensure a safe transmission of the required tightening torques, the tool is fixed to the motor axle via its integrated guide and connected to the lock nut by means of a push and pull mechanism. The teeth are made with a reinforced shape, thicker than normal. In this way, the tool can apply high torques when loosening or tightening the lock nut, ensuring no slippage. The tool can be used with the snap.in tool support (art. 7202750) or with a 32 mm combination wrench. During tightening, pay attention to the torque recommended by the manufacturer. To check the torque, use a 3/8'' torque wrench (art. 720115). Note: the lock nut extractor cannot be used with power tools.