The top adapter to extend the easyLoop system so it can be installed on even more bicycles. The adapter is mounted in place of the existing top cap and thus offers the possibility to install the Reverse easyLoop adapter above the stem. There are several reasons why installation above the stem is necessary.
- For stems that require special spacers and these cannot be replaced by the easyLoop adapter (e.g., C.I.S system)
- For bicycles where the fork steerer tube has been cut too short and it is not possible to mount spacers under or above the stem.
- For bicycles where the easyLoop adapter can be installed under the stem, but there is not enough space between the easyLoop adapter and the frame.
Not compatible with stems where the top cap is integrated into the stem or that require a special top cap.
Attention: No stem can be mounted on the top adapter. The adapter is not intended to extend the fork steerer tube and can only be used with the easyLoop adapter!
Features:
- Weight: 45 g (+/- 5% weight tolerance)
- Material: Aluminum (body), rubber (O-ring), steel (screw)
- Screw: M6 (for standard headset top nuts)

Material: Aluminum
Compatibility: n/a
Weight: 45 g
Color: black
Application: MTB