These eCrank MTN are the best for eBikes with:
- TQ-HPR50 & New HPR-60
- Specialized New Levo4
- Brose Mag Family
- Fazua-R50
- SRAM Powertrain
- Bafang M800
SPECIFICATIONS
BUY IT IF:
You have an eMTN bike with a Brose Mag family, FazuaR50, TQ-HPR50 Bafang M800 or the new Specialized Levo4 motor
MOTOR
BROSE Mag Family - With ISIS spline spindle in steel
FAZUA-R50 - With ISIS spline spindle in steel
TQ-HPR50/HPR60 - With ISIS spline spindle in steel
Bafang M800 - With ISIS spline spindle in steel
Specialized Levo4 - With ISIS spline spindle in steel
MATERIAL
Left & right arm set
- Carbon fiber (with rubber boots)
- Alloy
REF. WEIGHT
ALLOY = 520 g
CARB = 460g
Q Factor
These are the Q factors when installing this crank on these motors:
Q 171mm : on the FazuaR50 motor
Q 171mm : on the TQ-HRP50/HPR60 motor
Q 172mm : on the Levo4 motor
Q 183mm : on the Bafang 800 motor
Q 186mm : on the Brose Mag motor
Q 186mm : on the SRAM Powertrain motor
MAIN BOLT
8 mm AL main crank bolt for installation/self-extraction tightening torque 50 Nm
Our eCranks with ISIS spline use our replaceable M24 alloy main bolt.
TECHNOLOGY
C.R.A.F.T. Carbon Mfg.
NOTE
DO NOT order this crank if you own a Gen 1-3 Specialized Levo/Kenevo/Vomo/Vado Version.