The DeHy C1 kit allows you to optimize the ergonomics and reliability of your Reverb Stealth, replacing the bulky original hydraulic remote with our cable-controlled Triggy or 2-by Remote. After the conversion, your Reverb can be operated by one of our standard cable controls or any other control with sufficient cable travel. DeHy requires approximately 9mm of cable travel for maximum actuation precision, all of our remotes provide this.

Our DeHy C1 kit is compatible with the latest generation of Reverb (Reverb C1), introduced in summer of 2019.
Please note: It is only compatible with the much more common standard plumbing connector. It is not compatible with Connectamajic's rarer versions of the Reverb C1.
You can easily distinguish between the older versions of the Reverb and the current C1. C1 has a "reverb" logo on the top tube and while older versions B1 or A1/A2 have a "ROCKSHOX" logo (B1) or no logo (A1/A2).

Installation is quite simple, since it does not require opening the internal hydraulics of the seat post. You simply remove the original hydraulic hose and replace the lower unit with our DeHy kit and install the cable and remote control. You should be able to do this in less than 10 minutes. Another advantage is the availability and cost of replacement parts. In case of damage or breakage of the cable after a fall, you can easily find a shift cable and housing in practically any nearby bike shop, while it will be difficult to find an immediate replacement for the original hydraulic hose and fittings. Compared to the original "Connectamajic" hydraulic hose, our DeHy is shorter, which can be very useful in many cases to achieve greater insertion of the seat post into the seat tube.