The DeHy B1 kit allows you to optimize the ergonomics and reliability of your Reverb Stealth, replacing the bulky original hydraulic remote with our cable-controlled Triggy or 2-by Remote. After the conversion, your Reverb can be operated by one of our standard cable controls or any other control with sufficient cable travel. DeHy requires approximately 9mm of cable travel for maximum actuation precision, all of our remotes provide this.

DeHy B1 is compatible with all versions of the B1 generation Reverb Stealth (not compatible with C1) ( MY) 2017-2019.
You can easily distinguish the A1/A2 versions from the non-compatible B1 and C1 versions by the different appearance of the top pipe. The A1/A2 versions have an all-black top tube, while the B1 versions have a gold or silver "ROCKSHOX" logo on the top tube, just below the seat post head. The A1/A2 versions have no logo there. Non-C1 compatible versions have a "reverb" logo instead of "ROCKSHOX".

Installation is quite simple, as it does not require opening the internal hydraulics of the seat post. You simply remove the original hydraulic hose and replace the lower unit with our DeHy kit and install the cable and remote control. You should be able to do this in less than 10 minutes. Another advantage is the availability and cost of replacement parts. In case of damage or breakage of the cable after a fall, you can easily find a shift cable and housing in practically any nearby bike shop, while it will be difficult to find an immediate replacement for the original hydraulic hose and fittings. Compared to the original "Connectamajic" hydraulic hose, our DeHy is shorter, which can be very useful in many cases to achieve greater insertion of the seat post into the seat tube.